Saturday, September 24, 2022
HomePhonesHow to Find Out Why My Phone Won't Charge - 5 Tips...

How to Find Out Why My Phone Won’t Charge – 5 Tips to know

How to Find Out Why My Phone Won’t Charge

 

If you’re struggling to figure out why your phone won’t charge, read this article for some helpful tips. It will tell you how to fix a blocked charging port, check if your charger and cable combo is compatible, and even clean the charging port.

If none of these things seem to help, call a repair professional for help. If you’ve tried all of these methods and still haven’t figured out why your phone won’t charge, you may need to call a professional to diagnose the problem.

 

Fixing a blocked charging port

The first thing to check when your phone won’t charge is the charging port. This tiny opening is where you plug the end of the cabbie in, so current can flow.

Over time, the port can become clogged with dust and dirt, which prevents the sensors from receiving current.

A blunt pin or soft bristled unused toothbrush can help you clean the port. Make sure not to damage the port sensors!

Clean the charging port with a toothbrush or toothpick. Don’t use water, though. If it still doesn’t work, you may need to get a professional to repair the port.

If the problem persists, try to power up the device in safe mode. To do this, hold down the power button and the volume down button for about 6 seconds.

If that doesn’t work, try holding down the power and volume down buttons until the device starts to reboot.

Next, try switching to a wall socket. A faulty wall adapter can be the culprit behind the charging problem. The best way to fix a faulty wall adapter is to call a local electrician. Typically, it will be a simple fix for a broken charging port. If it does not fix the problem, you’ll need to get a new phone.

If none of these steps work, you should contact a professional technician or replace your phone. Then, you’ll have a new device to use as a backup! Don’t worry, though! Even if your phone is working, it won’t charge without the charging port.

If the charging port is blocked, your phone can still be repaired. However, if it still isn’t working, it will still cost you some money.

If the problem persists, check the charging port. It can get clogged with dust or other debris that prevents it from charging. If you can’t see it, you’ll need to use a plastic or wood toothpick to check.

Once you’re sure, you should be able to charge your phone normally again. If you’re still unsure, try using another power cord to charge the phone.

 

Checking if the charger/cable combination is compatible with the phone

If you’re unable to charge your phone, try charging it via PC, which can help narrow down the issue to the socket or adapter.

 

  • You can also try a different cable or adapter if that doesn’t fix the problem.
  • Try using a USB adapter from your computer to test whether the phone receives power. This should fix the issue.

If the problem still persists, check your cable. If the cable is twisted, bent, or frayed, it may be time for a replacement. Using another cable and plug will help you confirm that yours is the culprit.

  • Try charging the phone using the other cable and see if it charges properly. If it does, then you need to get a new cable.
  • Try another charger. If that doesn’t fix the problem, you should take it to an experienced technician.
  • Alternatively, try charging the phone wirelessly. This may not work for more serious hardware problems.

If you’re still not successful, try charging with another Qi-enabled device. If all else fails, it’s best to try a different cable and outlet.

 

Checking for damage on the phone

If your phone won’t charge, you may first try to check for battery damage. This may be as simple as trying to plug it into another outlet or recharging it with a wireless charger.

If this doesn’t work, you should visit an Apple store for a replacement wireless charging case or battery. If all else fails, you may have damaged your phone’s port.

A simple way to fix the problem is to try different charging accessories, like cables, USB adapters, or other devices.

If the issue is with the socket, you can try cleaning it with a toothpick and ethanol. Another possible cause is a damaged metal connector tab. Carefully adjust it, but try not to damage the phone’s hardware.

If the problem persists, you may need to contact the manufacturer. If you can’t find a new connector tab, try cleaning the socket. You may need to replace it entirely.

Water damage may cause your phone to refuse to charge. If you have water on your phone, avoid plugging it in until it dries out. You can blow dry the phone with a hairdryer, or dump it in a bowl of rice.

Wait a day or two before plugging it in. It will not charge if it has been soaked for several hours. If it won’t charge, try a different method.

If you’ve tried all of these things, the problem is likely with the charging port. You can clean the port with a brush or compressed air.

Also, make sure to check the wall charger and see if the plug is damaged. Cracked or bent outlets are red flags. If none of these suggestions works, it’s time for a replacement. You should replace the battery if it is dead.

 

Cleaning the charging port

The first step in resolving this issue is to clean the charging port. You can use a syringe or compressed air to remove the debris that is blocking the charging port.

It is important to use compressed air sparingly, as too much can damage the electronics. You can also use a hand-held vacuum to loosen up loose debris and lint.

You can also use a cotton swab or toothpick to remove debris from the charging port. Never use a metal object to clean the port, as this could cause an electrical short.

You can also use a toothbrush or compressed air, but be careful not to damage the charging port by sticking a sharp object in it. Afterwards, shake the device gently to remove the loose debris.

Next, try cleaning the port. The charging port is a common source of debris. Cleaning it properly can help prevent these problems, as it will restore the charging capacity of the device. But if cleaning the port is not possible, you can try a force restart, which can help solve software bugs.

To do this, press Volume Down and Power button simultaneously. Once you have done this, turn the phone back on and check the charging port.

  • Before you clean the charging port, make sure you are in a well-lit area.
  • The flashlight you use for your phone will not work for this task, so try using a second device to shine a light into the charging port.
  • You can then use a toothpick to remove lint. You can also use a small bobby pin or a needle to be gentle with the charging port.

A dirty charging port is another common cause of the charging port not working. To clean it properly, use a brush or compressed air. Don’t use metal objects to clean the charging port, as they may damage the contact points and prevent charging.

If you’ve tried this, but still can’t charge your phone, you should consider a replacement. If cleaning the charging port isn’t working, it’s time to contact an electronics store.

 

 

Fact Check

 

 

We hope you enjoyed this article… What are your thoughts?

 

 

Рleаse let us knоw yоur thоughts in the соmments seсtiоn. Feel free to share with us in the comments section below.

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

17 − five =

- Advertisment -

Most Popular

- Advertisment -
- Advertisment -